Camaro SS Drag Race Development Program
The Camaro SS Drag Race Development Program was created to develop performance parts for 2016+ Camaro models. A test vehicle was built to mimic the typical stair-step enhancements many amateur racers make with their production Camaro SS models, including swapping the differential for a numerically higher ratio and adding horsepower-building components such as a cam-and-heads package to push the SS’s LT1 engine to more than 530 horsepower — and about 600 horsepower with a power adder.
“More than simply achieving quick ETs in the Camaro, we are exploring the supporting components that help the car to go quicker with great durability,” said Mark Dickens, director, Performance Variants, Parts and Motorsports Engineering. “We’ve tested stronger axles and chassis components aimed at improving launch and traction attributes.”
Engineers have made more than 100 passes down the quarter-mile with the development car, including the evaluation of DOT-approved racing and slick tires and a variety of drivetrain combinations.
The engineering team also tested a higher-stall torque converter for greater launch capability, increasing the stall speed to 4,200 rpm with the LT1 engine. That’s approximately 30 percent higher than the stock converter. Along with a custom transmission calibration, the prototype converter allowed the car to launch harder, which improved the 60-foot time significantly and thereby improved the quarter-mile elapsed time.
The best performance to date includes:
60-foot time of 1.425 seconds
Eighth-mile time of 6.764 seconds at 100.85 mph
Quarter-mile time of 10.685 seconds at 125.73 mph
Consistency in the performance tests came in large part from the Camaro SS’ production eight-speed paddle-shift automatic transmission, which fired off quick, immediate upshifts.
“We worked this car just as hard as any serious racer would,” said Dickens. “We made pass after pass, pushing it harder, and were amazed at the capability and durability that came straight off the assembly line.”
To support the greater horsepower and channel it to the ground durably, the engineers borrowed some heavy-duty, proven parts from the Gen 6 Camaro ZL1 including the half-shafts and prop shaft and the beefier Gen 5 ZL1 and Chevrolet Performance driveline upgrade with a 250mm, 3.73-geared rear-axle center section. They nicknamed it “Gravedigger,” because they haven’t been able to break it. The parts might be included in a range of Gen Six Camaro drag-racing parts Chevrolet is evaluating.
Additionally, the test car was fitted with Chevrolet Performance air induction and exhaust systems, as well as a “small” brake system that features small-diameter brake rotors that fit inside the test car’s 16-inch rear racing wheels and slicks.
While the production Camaro SS features 20-inch wheels, optimal traction on the drag strip is achieved with racing slicks that feature taller sidewalls. They wrinkle slightly at launch as the slicks bite the starting line, reducing the chance for traction-killing tire spin. Smaller-diameter racing wheels typically don’t fit over large-diameter production brake rotors.
“The Camaro SS Drag Race Development concept is a work in progress, but Chevrolet is serious about developing parts and packages tailored for drag racers,” said Dickens. “As we continue to develop the car, we’ll be listening intently to customers’ reactions to it and what they believe would help them the most on the drag strip. This is only the beginning.”
Like other Chevrolet development vehicles, the Drag Race Development concept wears a camouflaged exterior. There is, however, no disguising its performance capability when it’s lined up at the Christmas tree.
Please Visit My Sponsors:
COPO Camaro News:
- Watch Chevrolet eCOPO Electric Camaro Do A Smoky Burnout
- GM unveils 700-horsepower electric Camaro
- Chevrolet Camaro eCOPO unveiled as a 800-volt, 9-sec EV dragster
- Chevrolet eCOPO Camaro Concept Can Run a 9-Second Quarter Mile
- It's Back! Marking 50 Years, Chevrolet Introduces A COPO Camaro With A 427 V8
- GM's Chevrolet Debuts A 9-Second, eCOPO Camaro Electric-powered Drag Race Car In Vegas
- Automakers Deliver Some Neat Tricks and Plenty of Treats for SEMA Show
- GM unveils 700-horsepower electric Camaro and, maybe, a way to build your own
- Electric Chevrolet eCOPO Camaro only burns rubber
- Chevrolet Terrorizes Tesla With 700HP eCOPO Camaro Concept
- 2019 Chevy COPO Camaro Gets Retro Look To Mark 50-Year Milestone
- Chevy eCOPO Camaro Concept Electrifies Drag Strip With 700+ HP